Dexibell VIVO S9 Owner's Manual page 46

to move the cursor under the "Velocity Compand"
function.
3.
Press the button [] to access the function.
The following page appears:
4.
Use the [] [] buttons to select one of the three
parameters available.
5.
Use the [ ] buttons to adjust the parameter you
[]

selected.
Parameter Setting
Start 0~127
Rate 0.1~8.0
Offset 0~127
In the example below you can see that the Start point was set to 52,
the "Offset" starts from the value 35 and the rate was set to 2.7.
Compression
Start
Offset
6.
Press the "RESET" Function button to restore the
parameters at the default value.
46
Explanation
It is the starting point of the velocity
curve where you want to operate with the
compression or expansion.
It is the compression/expansion coefficient
that you want to use.
It's the minimum value of velocity.
Rate
Expansion
Personalizing Your Sounds (T2L)