Adjust The Reverb For Each Part By The Draw Faders - Dexibell VIVO S9 Owner's Manual

The display shows the Reverb page:
As you can see, you have an additional part, the ORGAN part.
The ORGAN part is the part of the tonewheel. For example, if you
selected a tonewheel in the Main part, to adjust the reverb you
have to change the value of the ORGAN part and not the Main part.
MEMO
You can also select this function pressing [MENU] button
EFFECTS REVERB.
2.
Use the [] [] buttons to specify the part you wish to
change the Reverb level.
3.
Use the DATA ENTRY knob or the
adjust the Reverb level.
4.
Using the F1 Function button you can enable or disable
the Reverb for all parts of the keyboard .
Changing the Reverb Type
This parameter allows you to specify what kind of reverb effect you need.
1.
While the Reverb page is displayed, press the "TYPE" F2
Function button to access the Reverb Type page.
[ ] buttons to
[]


Adjust the Reverb for Each Part by the Draw Faders

2.
Use the DATA ENTRY knob or the
choose the Macro Type you prefer.
The available Macro reverb types are:
Setting
Hall, Dark Hall, Mid Hall, Concert Hall, Large Hall, Chathedral, Arena, Cave,
Chamber, Room, Venue, Ambience, Wooden Room, Brick Room, Studio
Booth, Small Room, Living Room, Office, Warehouse, Music Club, Plate,
Small Spring, Bright Spring, AmpSpring
Adjust the Reverb for Each Part by the
Draw Faders
By the draw faders you can adjust the reverb for each part.
1.
Press [MIXER] button to assign the 9 draw faders to adjust
the reverb for each part.
2.
You can adjust the reverb for each part moving the
corresponding draw faders. On the panel, below each one
of draw fader, is indicated the assigned part.
[ ] buttons to
[]

33