Moving The Cursor And Setting Parameter Values; Assigning The Name You Specify - Dexibell VIVO S9 Owner's Manual

Moving the Cursor and Setting Parameter
Values
1.
Press the [MENU/EXIT] button to access to the available
function groups.
2.
Use the [DATA ENTRY] knob or the [] [] buttons to
select the entry of the desired function group.
3.
Press the [ ] button to enter in the selected function

group.
4.
Use the [DATA ENTRY] knob or the [] [] buttons to
scroll the list of settings and press the [
in the selected setting.
5.
Use the [] [] buttons to scroll the list of parameters.
The selected parameter field is displayed in reverse
6.
Use the [DATA ENTRY] knob or the
the desired value.
] button to enter

[ ] buttons to set
[]


Moving the Cursor and Setting Parameter Values

7.
Press the [MENU/EXIT] button to return to the main page.

Assigning the Name You Specify

In many cases you'll have to assign a name to a file. In the following
example, we will learn how to give a Memory name.
After the selection of saving a Memory, the display looks as follows:
A Memory name is suggested by the S9.
1.
Use the [DATA ENTRY] knob or the [][] buttons to
select a different character.
2.
Use the [ ] buttons to select the next character
[]

position you want to change, then select the new
character using the [DATA ENTRY] knob or the [][]
buttons.
3.
You can press the [A/a/#] F2 Function button to switch
between Main- and lower-case characters as well as
numbers.
4.
To delete the selected character, simultaneously press the
F2 and F3 Function button.
5.
To insert a character, simultaneously press the F1 and F2
Function button.
23