Table of Contents
Advertisement
The following page is shown.
2.
Use the [DATA ENTRY] knob or the
choose your desiderate dynamic response.
3.
To customize the velocity curve press the F1 Function
button.
4.
Use the
[
] buttons to select one of the 5 points that
[]
characterize the curve: "pp", "p", "mf", "f", "ff".
5.
Use the [] [] buttons to modify the value of the
selected point.
Curve Point
"pp" standing for pianissimo and meaning
"very soft".
"p" standing for piano and meaning "soft".
"mf" standing for mezzo-forte and
meaning ""half loud"".
"f" standing for forte and meaning "loud".
"ff" standing for fortissimo and meaning
"very loud".
6.
Use the "RESET" Function button to restore the point at
the default value.
Your velocity curve is automatically saved in the global
area when the instrument is turned off.
Adjusting the AUDIO IN Input Level
The input level of the audio source you connect can be set with the
"AUDIO INPUT Level" parameter.
1.
Press [MENU/EXIT] button and select SETTING
function using the [], [] and [
the Cursor and Setting Parameter Values" (p. 23).
2.
Use the [DATA ENTRY] knob or the
adjust your desiderate the AUDIO IN level.
36
[
] buttons to
[]
Explanation
AUDIO INPUT
] buttons. See "Moving
[
] buttons to
[]
Restoring the Factory Settings (Factory
Reset)
The following function allows you to recall the S9's original factory
settings.
WARNING
All data will be deleted. Backup your own settings to an USB
memory.
1.
Press [MENU/EXIT] button and select FACTORY RESET function.
See "Moving the Cursor and Setting Parameter Values" (p.
23).
The display shows the following window.
2.
Press the "YES" Function button proceed.
The message "Complete" informs you that the S9 has been
initialized.
NOTE
The Factory Reset function doesn't initialize the Global Area.
Restore the Factory Sounds
Using this function you can restore all sound libraries as they came out of
the factory.
1.
Press [MENU/EXIT] button and select FACTORY SOUND
function. See "Moving the Cursor and Setting Parameter
Values" (p. 23).
The following page appears:
2.
Press the "YES" Function button proceed.
The message "Complete" informs you that the S9 Sound Libraries
has been restored.
If you no longer want to restore the sound libraries, press the "NO"
Function button
Other Functions
Advertisement
Table of Contents
