Table of Contents
Advertisement
1.
Connect a sustain pedal to the DAMPER (HOLD) socket.
This is the most commonly used pedal in percussive instruments.
When the pedal is pressed, all notes played will continue to sound
until the vibration naturally ceases.
2.
Connect a foot-switch to the ASSIGN 1 socket.
An optional foot-switch connected to the ASSIGN 1 socket can be
used to perform various functions. For detail see "PEDAL SETTING"
(p. 63).
NOTE
The ASSIGN 1 socket accepts foot-switches ON/OFF type only.
3.
Connect an expression pedal to the ASSIGN 2
(EXPRESSION) socket.
You can control the volume of the Organ, Orchestra and Piano
sections.
The EXPRESSION socket is assignable in a way that various functions
can be assigned to it. For detail see "PEDAL SETTING" (p. 63).
4.
Connect an expression pedal to the ASSIGN 3
(MORPHING) socket.
If the Morphing function is active, you can use an expression pedal
to drive the transitions between two different combinations of
draw-faders (MORPHING). See "Useful Draw-faders Movement
Functions (Morphing)" (p. 29).
Listening Through Headphones
You can use headphones to enjoy the S9 without disturbing those
around you.
1.
Here you can connect stereo headphones. The S9 has
two headphones jacks . Two people can use headphones
simultaneously.
2.
Rotate the S9's [VOLUME] knob to adjust the volume of
the headphone.
Cautions when using headphones
• To prevent damage to the cord's internal conductors, avoid rough
handling. When using headphones, mainly try to handle either the
plug or the headset.
• Your headphones may be damaged if the volume of a device is
already turned up when you plug them in. Minimize the volume
before you plug in the headphones.
• Excessive input will not only damage your hearing, but may also
strain the headphones. Please enjoy music at a reasonable volume.
18
Connecting Digital Player Devices
You can connect the INPUT mini jack to an audio playback device.
1.
Rotate the [VOLUME] knob toward the left position to
minimize the volume.
2.
Connect the S9's AUDIO IN mini jack to the output of an
external signal source.
3.
To adjust the input level the S9's AUDIO IN, press the
[MENU] button and select the AUDIO INPUT function.
Connecting the S9 to Your Computer
If you use a USB cable (commercially available) to connect the USB
COMPUTER port on the S9's rear panel to your computer's USB connector,
you can record and play audio and/or MIDI data by your MIDI software
(DAW software).
NOTE
To use the USB audio streaming you need of a computer
equiped with MAC OSX or LINUX, an iPad or iPhone.
NOTE
The S9 does not support GM/GS standard.
1.
Use a standard USB cable (AgB-type connectors,
commercially available) to connect the S9 to your
computer as shown below.
USB MIDI + AUDIO Streaming
NOTE
• Switch on the S9 before you start up the DAW software on your
computer.
• Before to connect any other equipment, move the [VOLUME] knob
counterclockwise to minimize the volume.
Now, the same sound of the S9's audio OUTPUT (unbalanced or
balanced) can be recorded into your computer and the sound from
Before You Start to Play
Advertisement
Table of Contents
