Other Functions; Transposing The Pitch Of The Keyboard; Shifting The Tuning Of A Keyboard Part In Octave Steps; Aftertouch - Dexibell VIVO S9 Owner's Manual

11

Other Functions

Transposing the pitch of the keyboard

The Transpose setting allows the pitch of your digital piano keyboard to be
raised or lowered in semi-tone steps.
This is particularly useful when accompanying instruments tuned for
different keys, or when a song learned in one key must be played in
another key or when a singer sing in a key different than the original
music.
1.
Press the [TRANSPOSE] button
The display shown the following page.
2.
Use the DATA ENTRY knob or the
adjust the transposition value.
"Transpose" setting
-12 ~ 0 ~ +12 (semitone units)
If you set a value different than 0, the [TRANSPOSE] button
indicator lights and the keyboard is transposed.
3.
Press the F1 Function button to enable or disable the
transposition
.
MEMO
You can also select this parameter pressing [MENU] button
SETTINGTRANSPOSE.
Shifting the Tuning of a Keyboard Part
in Octave Steps
The Octave function is an useful parameter that allows you to change the
pitch of the selected part in octave steps (12 semitones at a time).
1.
Press the [OCTAVE] button.
The following page appears:
34
.
[ ] buttons to
[]

The display shown the octave value for each part.
2.
Use the the [] [] buttons to select the keyboard part
you want to change the octave.
3.
Use the [DATA ENTRY] knob or the
the desiderate octave for the selected part.

Aftertouch

The S9 is equipped with an Aftertouch-sensitive keyboard.
Aftertouch is generated when you press a key even further down after
playing a note. The aftertouch will affect to all notes playing in that
keyboard part. The effect obtained is usually a filter.
1.
Press the [AFTERTOUCH] button to enable the function
indicator lights.

Assigning a function

1.
Press and hold the [AFTERTOUCH] button to open the
"AFTERTOUCH" page.
2.
Use the [] [] buttons to select the "Funct." (Function)
parameter.
3.
Use the [DATA ENTRY] knob or the
the desiderate function.
4.
By the "Main", "Coupled", "Lower" and "Pedal" parameters
you can choose on which part works the aftertouch.
See below the list of controls you can assign:
Control Explanation
Aftertouch You can control the aftertouch.
Modulation You can control the modulation by the aftertouch.
You can control the FXmanual of the effector by the
FX Manual aftertouch, see "16: Wah-Wah" (p. 74) and "17: Cut Filter"
(p. 74) .
[ ] buttons to set
[]

. Its
[ ] buttons to set
[]
