Mounting; Safety Information For Installation; Mounting The Device - Siemens SITRANS DA400 Operating Instructions Manual

Mounting

4.1

Safety information for installation

Ambient temperature
Fire hazard
Fire hazard resulting from hot surfaces. When installing the sensor, take note of the surface
temperature of the installation site.
Overview
The SITRANS DA400 and the sensor are mounted in different ways. In general:
Note
Protection against harmful outside influences
To protect the SITRANS DA400 against harmful outside influences, a housing should be
fitted. Harmful external influences can occur if you install the SITRANS DA in the open air,
where it can be influenced by intensive frost, heat or rain.
4.2

Mounting the device

Condition
To mount the device, you need three screws with a diameter of 6 mm. These are not
supplied with the device.
SITRANS DA400 for oscillating positive displacement pumps with protection against explosion
Operating Instructions, 10/2007, A5E00841127-01
WARNING
4
19