insys icom 56k Manual page 115

INSYS Modem 56k AC/DC 4.2
S36* Reset of error logs
Bit
Bit 0..2
Bit 3.0.5
Bit 6
Bit 7
S38 Time period until forced hang up
Maximum time left for the buffers to empty their data, after a command to hang
up has been received. Only applies to error corrected connections.
S39* Flow control
Selection of the data flow control between the PC and the modem
S39=0
S39=3
S39=4
S39=5
S39=6
Meaning
Determines what hap-
pens if an attempt to
establish a V.42 LAP-M
connection fails. It is
connected to the registry
S48.
SMS type
Key abort
Call acceptance
No data flow control (AT&K0)
RTS/ CTS data flow control (AT&K3)
XON/ XOFF data flow control (AT&K4)
Transparent XON data flow control (AT&K5)
RTS/CTS and XON/XOFF data flow control
0 Modem hangs up
1 Modem stays online and establishes a direct
mode connection.
2 Reserved
3 Modem stays online and establishes a direct
mode connection.
4 Modem attempts to establish a MNP
connection. In case of failure it hangs up.
5 Modem attempts to establish a MNP
connection. In case of failure a direct mode
connection is established.
6 Reserved
7 Modem attempts to establish a MNP connec-
tion. In case of failure a normal mode con-
nection is established.
0: normal fixed network modem
1: D1 and E networks
4: D2 network
(AT*M4)
5: Fax
(AT*M5)
6: Fixed network SMS
0: Key abort activated
1: Key abort deactivated
1: Call answer not locked
0: Call acceptance locked
S Registry
(AT*M0)
(AT*M1)
(AT*M6)
(AT%B0)
(AT%B1)
(AT*A1)
(AT*A0)
115