Screen Innovations Nano Roll 375 Series Installation Instructions Manual page 3

SPACER BLOCKS AND LEVELING SHIMS (OPTIONAL)
Spacer Blocks - used to clear an obstruction in the fabric path.
Connect spacer blocks to shade brackets before installation
Note: Do not use more than 4 Spacer blocks per bracket.
Leveling Shims - used if the window frame is out of level.
Connect to shade brackets before installation
Note: do not use more than 2 leveling shims per bracket.
Spacer Blocks and Leveling Shims (Optional)
INSTALLATION - 120 VAC - RTS (375 / 475 SERIES)
Before installing the shades, verify whether the shade was ordered as standard roll or reverse roll. Though
illustrations in this manual show standard roll shades, the installation for reverse roll shades is the same.
1. If mounting to a wall, remove the ceiling flange from motor and idler brackets
Motor Side
2. Install wall bracket/end cap assembly with the supplied screws
for Wall
Mount
Motor side
Pg 3 Installation - Nano Roll - 120 VAC - RTS - 375 / 475
Motor Side
for Ceiling Mount
Idler side
Pg 4