Changing Fuses - BARTEC BENKE HYGROPHIL H 4230-12 Ex Zone II Operating Instructions Manual

Maintenance
82
6.9
Fuse 2 : Heating
T 6A
Fuse 1 : Electronics supply
MT 2A

Changing fuses

The two fuses are located in the electronics enclosure (door on the right).
Press in the fuse holder using a screwdriver and turn it a little anticlock-

wise.
Extract the fuse holder and exchange the fuse.

 Insert the fuse holder together with the new fuse and lock it again by
turning it clockwise.
Operating Instructions HYGROPHIL® H 4230-12 BA 060207