1-Channel Parameters - BARTEC BENKE HYGROPHIL H 4230-12 Ex Zone II Operating Instructions Manual

PROFIBUS
98
8.3.5
DaAdr(hex) Identifier
$40 Heating_w
$41 Heating_xp
$42 HeatingControlStatus
$46 ErrorTime
$47 HT ohne Komp
$48 T2KorrektConfig
$4C Timeout Aktivierung
DaAdr $3B: Fullscale
Format: Array [1...2] of Float
Before you can write this variable you must first change to standby mode.
Setpoint value that corresponds to 100% in the output.
Default:
Setpoint [x] Designation/unit
1 DT/°C
2 HT/°C
DaAdr $3C: Zeropoint
Format: Array [1...2] of Float
Before you can write this variable you must first change to standby mode.
Setpoint value that corresponds to 0% in the output.
Default:
Zeropoint [x] Designation/unit
1 DT/°C
2 HT/°C

1-channel parameters

Memory-Type
EERPOM read/write
EERPOM read/write
RAM read/write
EEPROM read/write
RAM read
EEPROM read/write
EEPROM read/write
DaAdr $40: Heating_w
Format: Float
Before you can write this variable you must first change to standby mode.
Setpoint value w for the hose heating control (actual value =TT).
Default = 120°C
DaAdr $41: Heating_xp
Format: Float
Before you can write this variable you must first change to standby mode.
Proportional range xp in %.
Default = 3%
Operating Instructions HYGROPHIL® H 4230-12 BA 060207
Value
100
100
Value
0
0
Read-out Format
dec Float
dec Float
----- Record
dec Integer
dec Float
dec Char
hex Char