Table of Contents
Advertisement
5. Software Control - Lightware Device Controller
5.4.1. Button Properties
Click the button icon on wireframe view to display and modify the related configuration.
ATTENTION! Clicking on the button icon on the wireframe view does not simulate the button click. Test
Button Press button is for that purpose.
The following settings are available in the Button Properties section:
▪
Button enabled: The buttons can be enabled or disabled independently of each other (when the button
is disabled, pressing it will have no effect).
Button name: The button name can be 32 character-long, ASCII characters are allowed. Longer names
▪
are not accepted.
▪
Operation mode: Three modes are available: momentary, toggle, or radio group (1-5). For more details
about the operation modes, see the
Interaction state: Displays the current state of the selected button. For more information about the
▪
interaction states, see the
▪
LED enabled: LED function of the selected button can be turn on and off.
Test Button Press: Press the Test Button Press button to test the buttonpress (indicates a virtual button press).
▪
▪
LED function for TRUE/FALSE state: Six default button LED state can be set : off / low bright / high bright/
blink /slow blink / sine pulse
LED behavior changes depending on the interaction state. For more information, see the
Configuration
section.
5.4.2. Configure Button
This section provides a layout where button functions can be set quick and easy.
The first two configuration tabs are for setting the Actions (outputs) of the chosen button. In this case, the
trigger condition is always the same. The second two tabs are for setting the Feedbacks (conditions or inputs) and
the action is fix.
Buttons
section.
Buttons
section.
RAP-B511 series – User's Manual
The tab denomination depends on the button operation mode. A short description gives a hint to choose the
proper condition or action for the selected button.
Tabs to set the action
1
Tabs to set the feedback
2
Short description
3
Action or condition list
4
Summary of the actions and feedbacks tabs
Button
operation mode
Momentary
Toggle
Button LED
Radio group 1-5
1
3
4
Tab name
Action
Choose the desired action from
Press actions
the list
Choose the desired action from
Release actions
the list
TRUE feedbacks
Interaction state is true
FALSE feedbacks
Interaction state is false
Choose the desired action from
Toggle ON actions
the list
Choose the desired action from
Toggle OFF actions
the list
TRUE feedbacks
Interaction state is true
FALSE feedbacks
Interaction state is false
Choose the desired action from
Turn ON action
the list
Choose the desired action from
Turn OFF action
the list
TRUE feedbacks
Interaction state is true
FALSE feedbacks
Interaction state is false
28
2
Feedback (condition)
Interaction state is true
Interaction state is false
Choose the desired condition
from the list
Choose the desired condition
from the list
Interaction state is true
Interaction state is false
Choose the desired condition
from the list
Choose the desired condition
from the list
Interaction state is true
Interaction state is false
Choose the desired condition
from the list
Choose the desired condition
from the list
Advertisement
Table of Contents
Troubleshooting
