Firmware Upgrading Steps - Lightware RAP-B511-EU-K User Manual


  
8. Firmware Upgrade
8.3. Firmware Upgrading Steps
ATTENTION! While the firmware is being upgraded, the normal operation mode is suspended as the
device is switched to bootload mode. Signal processing is not performed. Do not interrupt the firmware
upgrade. If any problem occurs, reboot the unit and restart the process.
Step 1. Connect the computer to the same network as the RAP-B511 is located. Run the LDU2 software. The
discovered and known devices are being loaded.
Step 2. Select the firmware package file (*.lfp2). When the file is selected the release note is displayed in the
right window. Please read it carefully.
RAP-B511 series – User's Manual
Step 3. Press the Open button. The listed devices – which are compatible with the firmware pack – are
filtered automatically in the main screen. Parameters button opens a window, where factory default
restore can be chosen after the firmware upgrade. Press Apply to accept.
Step 4. Select the desired devices and press the Start Update button. The upgrade takes about 3-4 minutes to
finish which is independent of the number of the upgraded devices since the upgrades are processed
simultaneously.
Step 5. Finish. Clicking on the

icon, a log information is displayed in the Device Log window.
66