Product Overview; Front View - Lightware RAP-B511-EU-K User Manual


  

3. Product Overview

3
P roduct Overview
The following sections are about the physical structure of the device, and the
connectors:

Front View

Ý
Rear View
Ý
Electrical Connections
Ý
RAP-B511 series – User's Manual
3.1. Front View
INFO: All the models have the same look and controls on the front panel, the only difference is the size
and the color of the enclosure.
1
INFO: The labels of the buttons are just for illustration since the button caps are empty by default. The
user can insert the desired label from the attached sheet.
1
Buttons 11 configurable buttons with short and long press detection.
Each button has a programmable background light. They can be configured for
immediate feedback of pushing the buttons or can be set five different modes:
off / low bright / high bright / slow blink / sine pulse.
Blinking of the button and rotary LEDs three times means, that the front panel
functionality is locked. Unlocking is possible with
Controller
Reference
2 Rotary Eight green-colored LEDs for giving feedback about the current position of the jog dial knob.
LEDs
full bright
half bright
off
3 Rotary Jog dial for volume control on a 16-level scale or to be programmed for other controlling
knob purposes by turning and clicking the knob.
4
Mute LED It gives feedback about the mute status of the volume. It can be toggled on and off by
pushing the rotary knob.
on
off
blinking
5 IR detector
Built-in IR eye to receive infra signal.
ON OFF
AUTO
2 3 4
Software Control - Lightware Device
or via LW3 protocol commands (for more details see
section).
As the jog dial is rotated right (and the volume increases), the LEDs
turn on one-by-one. One level means half bright. The picture on the
left shows that the volume is set 11.
The volume is muted.
The volume is unmuted.
The device is in bootload mode. Press the rotary knob for 5 sec for
changing to the normal operation mode.
14
5
LW3 Programmers'