Powering Options; Connecting Steps - Lightware RAP-B511-EU-K User Manual

Room automation panel

Hide thumbs

Table Of Contents

Table of Contents





 

2. Installation

2.2. Powering Options

RAP-B511 series automation panel is compatible with IEEE 802.3af standard - Power over Ethernet (PoE) -

and one Ethernet port can receive, and the other one can send power over the Ethernet line.

The room automation panel can be powered by any of the following ways:

Local adaptor and remote power (PoE OUT)

When it is locally supplied with 48V DC adaptor, the room automation panel is able to send remote power via

POE OUT RJ45 connector to other PoE-compatible device.

Remote power injector (PoE IN)

The RAP-B511 can be powered remotely by a PoE-compatible power injector, like a PoE-compatible switch.

Connect it to the POE IN labeled RJ45 connector.

Standalone Matrix or Matrix board (PoE IN)

Powering by a matrix board* over the CATx (TPS) cable. Output board needs to be powered by an external

PSU. Connect it to the POE IN labeled RJ45 connector.

* TPS2 I/O board with PoE extension (-P)

INFO: Over the CATx cable, the Ethernet communication is transmitted.

Local adaptor and

remote power (PoE out)

48V DC

Power

adaptor

RAP-B511-EU-K

Power

send

PoE-compatible unit

Remote power injector (PoE in)

Matrix board (PoE in)

PoE-compatible switch

External

power supply

Power send

RAP-B511-EU-K

RAP-B511 series – User's Manual

2.3. Connecting Steps

GPIO

Connect a controller/controlled device (e.g. relay box) to the GPIO port.

CATx

RS-232

For RS-232 extension: connect a controller/controlled device (e.g. Projector) to the RS-232 port.

(TPS)

Power send

LAN

▪

Connect the switcher to a LAN network in order to control the device.

Connect a PoE-compatible device for remote powering and control to the PoE out LAN port.

▪

Built-in infra detector is ready to receive any IR signal without user intervention.

Power

Powering on the devices is recommended to do as the final step during the installation. Please check the