Set The Background Light For A Period Of Time; Button Group Configuration; Set The Buttons Into Groups; Query The Group Members - Lightware RAP-B511-EU-K User Manual


  
7. LW3 Programmers' Reference
Set the FalseFunction
Here can define how the LEDs behave, when the button is pressed or released. This property takes into
consideration the Set the Button Interaction
according to this setting.
Command and Response
SET·/MANAGEMENT/UI/LEDS/<LED_ID>.FalseFunction=<light_mode>
Ý
pw·/MANAGEMENT/UI/LEDS/<LED_ID>.FalseFunction=<light_mode>
Ü
Parameters
Identifier Parameter description
<light_mode> Type of the background light.
Example
Ý SET /MANAGEMENT/UI/LEDS/LED11.FalseFunction=2
Ü pw /MANAGEMENT/UI/LEDS/LED11.FalseFunction=2
7.6.3. Set the Background Light for a Period of Time
Command and Response
Ý CALL·/MANAGEMENT/UI/LEDS/<led_ID>:<button_func>(<time>)
Ü mO·/MANAGEMENT/UI/LEDS/<led_ID>:<button_func>(<time>)
Parameters
Identifier Parameter description
<led_ID> LED identifier
<button_func> Type of the background
lightning.
<time> Duration of time in ms
while the LED lights.
Example
Ý CALL /MANAGEMENT/UI/LEDS/LED11:tempFuncOff(100)
Ü mO /MANAGEMENT/UI/LEDS/LED11:tempFuncOff
State. If it is false (<btn_ID>.State=false), the LED will light
Parameter values
0: Off
1: Low brightness
2: High brightness
3: Blinking
4: Slow blinking
5: Sine pulse
Parameter values
LED1-11
tempFuncOff: No brightness
tempFuncLowBright: Low brightness
tempFuncHighBright: High brightness
tempFuncBlink: Blinking
1-60000
RAP-B511 series – User's Manual
7.7. Button Group Configuration
7.7.1. Set the Buttons into Groups
The button mode defines which button belongs a certain group. For more information about it, see
Button Operation Mode section.
7.7.2. Query the Group Members
Command and Response
Ý GET·/MANAGEMENT/UI/GROUP/<group_ID>.GroupMembers
pr·/MANAGEMENT/UI/GROUP/<group_ID>.GroupMembers=<member_list>
Ü
Parameters
Identifier Parameter description
<group_ID> Group identifier
<member_list> Shows which buttons belong to
the group. The members are listed
with their button ID numbers.
Example
Ý GET /MANAGEMENT/UI/GROUP/G1.GroupMembers
Ü pr /MANAGEMENT/UI/GROUP/G1.GroupMembers=1;2;3;
7.7.3. Set the Active Button
Command and Response
SET·/MANAGEMENT/UI/GROUP/<group_ID>.Active=<btn_nr>
Ý
pw·/MANAGEMENT/UI/GROUP/<group_ID>.Active=<btn_nr>
Ü
Parameters
Identifier
<group_ID> Group identifier
<btn_nr> Shows which button is the active member of the group.
It means, that the BUTTON<btn_nr>.State=true (and the
State property of the other members in the group are
false). For more information about the button states see
Set the Button Interaction State
Example
Ý SET /MANAGEMENT/UI/GROUP/G1.Active=1
Ü pw /MANAGEMENT/UI/GROUP/G1.Active=1
Parameter values
G1-5
1-11;1-11;...1-11;
Parameter description Parameter values
G1-5
1-11
section.
53
Set the