Menu 5 - Service - Nibe VVM 320 Installer Manual

Menu 5 - SERVICE

Overview
5 - SERVICE 5.1 - operating settings
5.2 - system settings
5.3 - accessory settings
5.4 - soft in/outputs
5.5 - factory setting service
5.6 - forced control
5.7 - start guide
5.8 - quick start
5.9 - floor drying function
5.10 - change log
5.12 - country
* Accessory needed.
Go to the main menu and hold the Back button in for
7 seconds to access the Service menu.
Sub-menus
Menu SERVICE has orange text and is intended for
the advanced user. This menu has several sub-menus.
Status information for the relevant menu can be found
on the display to the right of the menus.
NIBE™ VVM 320
5.1.1 - hot water settings
5.1.2 - max flow line temperature
5.1.3 - max diff flow line temp.
5.1.4 - alarm actions
5.1.5 - fan sp. exhaust air *
5.1.12 - internal electrical addition
5.1.13 - max inst. el.pwr (BBR)
5.1.14 - flow set. climate system
5.1.18 - flow setting charge pump
5.1.22 - heat pump testing
5.1.23 - compressor curve
5.1.25 - time filter alarm
5.2.2 - installed heat pump
5.2.4 - accessories
5.3.2 - shunt controlled add. heat *
5.3.3 - extra climate system *
5.3.6 - step controlled add. heat *
5.3.7 - external addition *
5.3.8 - hot water comfort *
5.3.14 - F135 *
5.3.15 - GBM communications module
*
5.3.18 - pool*
5.3.19 - active cooling 4 pipe*
5.3.20 - flow sensor*
operating settings
module.
system settings
activating accessories etc.
accessory settings
accessories.
soft in/outputs
outputs on the input circuit board (AA3).
factory setting service
ing settings available to the user ) to default values.
5.11.1.2 - heating medium
pump (GP1)
Operating settings for the indoor
System settings for the indoor module,
Operational settings for different
Setting software controlled in and
Total reset of all settings (includ-
Chapter 8 | Control - Menus 47