3 VVM 225 – at your service
Set the indoor climate
TEMPERATURE
Menu
1.1
If the house has several climate systems,
this is indicated on the display by a ther-
mometer for each system.
Choose between heating or cooling and
then set the desired temperature in the
next menu "temperature heating/cooling"
in menu 1.1.
Set the temperature (with
room sensors installed and
activated):
heating
Setting range: 5 – 30 °C
Default value: 20
cooling (accessory required)
Setting range: 5 – 30 °C
Default value: 25
The value in the display appears as a temperature in °C if the climate system is
controlled by a room sensor.
26
Chapter 3 | VVM 225 – at your service
Caution
A slow heating system such as underfloor heating may not be suitable
for control using the indoor module's room sensors.
temperature heating1.1.1
temperature cooling1.1.2
NIBE VVM 225