100-0002
•
OK
3
, Select [OK] with v on the
control button, then press z.
"DISC ACCESS" appears on the LCD
screen. When this message disappears, the
images have been deleted.
To cancel deleting
Select [CANCEL] with V on the control
button, then press z.
42
Formatting a CD-RW
DELETE
OK
CANCEL
2002 7 4
10:30
PM
1
, Place the CD-RW you want to
format in the disc tray.
Set the mode dial to SET UP,
and turn on the camera.
• Formatting is performed to delete all the images
on the CD-RW or to use a CD-RW formatted
with other equipment than this camera. When
you format a CD-RW, all data stored on
the disc will be deleted. Check the
contents of the disc before formatting.
The CD-RW is also automatically
initialized after formatting.
DISC TOOL
FINALIZE :
FORMAT :
INITIALIZE :
UNFINALIZE :
OK
2
, Select
[DISC TOOL] with v/
V on the control button, then
press B. Select [FORMAT] with
v/V, then press B.
• When you format, be sure to use a fully charged
battery pack or the AC power adaptor as the
power source.
• A CD-R cannot be formatted.
OK
CANCEL
Need help?
Do you have a question about the MVC-CD250 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers