Rotating Still Images - Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual

To cancel the slide show setting
Select [CANCEL], then press z in step 3.
To stop slide show playback
Press z, select [EXIT] with B, then press
z again.
To skip to the next/previous
image during the slide show
Press B (next) or b (previous).
• The interval setting time may vary depending
on the image size.
88

Rotating still images

Mode dial:
You can rotate image recorded in portrait
orientation and display it in landscape
orientation.
Control button
Mode dial
MENU
a Set the mode dial to
display the image to rotate.
b Press MENU.
The menu appears.
c Select [ROTATE] with b/B,
then press z.
d Select
or with v/V, then
rotate the image with b/B.
e Select [OK] with v/V, then
press z.
To cancel rotation
Select [CANCEL] in step 4, then press z.
• You cannot rotate protected images (page 89)
and images recorded as movies (MPEG
MOVIE), Clip Motion, Multi Burst or TIFF
images.
• You may not be able to rotate images shot with
other cameras.
• Also, when viewing images on a computer, the
image rotation information may not be
reflected depending on the application
software.
• If you rotate an image, the disc remaining space
will decrease.
• If the disc remaining space is not sufficient, you
may not be able to rotate an image.
, and