Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual page 102

Viewing images
Symptom
Your camera cannot play
back images.
The image appears rough
right after playback starts.
The image does not
appear on the TV screen.
The picture is noisy.
The image cannot be
played back on a
computer.
Deleting/Editing Images
Symptom
Your camera cannot
delete an image.
You have deleted an
image by mistake.
The resizing function
does not work.
You cannot display a print
mark.
102
Cause
• The mode dial is not set to
• Your camera cannot play back image files
copied to the hard disk of your computer if the
file name has been changed or the image has
been modified.
—
• The video output signal setting of your camera in
the SET UP settings is incorrect.
• The connection is not correct.
• Your camera is placed near a TV or other
equipment with a strong magnetic field.
—
Cause
• The image is protected.
• The disc is not initialized.
• The disc remaining space is not sufficient.
• Once you have deleted a file, you cannot restore
it.
• You cannot resize movies (MPEG MOVIE),
Clip Motion, Multi Burst and uncompressed
images.
• The disc remaining space is not sufficient.
• You cannot display print marks on moving
images and Clip Motion images.
• The disc remaining space is not sufficient.
Solution
p Set it to
.
—
p This is not a malfunction.
p Change the setting (pages 62 and 117).
p Check the connection (page 37).
p Move your camera away from the TV, etc.
p See page 103.
Solution
p Cancel the protection (page 89).
p Initialize the disc (page 21).
p This is not a malfunction.
p Protect images against accidental erasure (page 89).
—
p This is not a malfunction.
—
p This is not a malfunction.
(page 35).