Changing Image Size - Resize; Choosing Images To Print - Print Mark - Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual

Changing image size
– Resize
Mode dial:
You can change the image size of a
recorded image, and save it as a new file.
You can resize to the following sizes.
2272×1704 (MVC-CD400 only),
1600×1200, 1280×960, 640×480
The original image is retained even after
resizing.
Control button
Mode dial
MENU
a Set the mode dial to
b Display the image you want to
resize with b/B.
c Press MENU.
The menu appears.
d Select [RESIZE] with b/B, then
press z.
e Select the desired size with v/
V, then press z.
To cancel resizing
Select [CANCEL] in step 5, then press z.
• The resized image is recorded as the newest
file. The original image is retained.
• You cannot change the size of movies (MPEG
MOVIE), Clip Motion, Multi Burst or TIFF
images.
• When you change from a small size to a large
size, the image quality deteriorates.
• You cannot resize to an image size of 3:2.
• When you resize a 3:2 image, the upper and
lower black portions will be displayed on the
LCD screen.
• If you resize an image, the disc remaining space
will decrease.
• If the disc remaining space is not sufficient, you
may not be able to resize an image.
.
Choosing images to
print
– Print mark
Mode dial:
You can mark a print mark on still images
shot with your camera. This mark is
convenient when you have images printed
at a shop that conforms with the DPOF
(Digital Print Order Format) standard.
Control button
Mode dial
MENU
• You cannot mark movies (MPEG MOVIE) or
Clip Motion images.
• In E-mail mode, a print mark is marked on the
normal size image that is recorded at the same
time.
• When you mark images shot in Multi Burst
mode, all the images are printed on one sheet
divided into 16 panels.
91