Formatting A Cd-Rw - Sony MVC-CDZOO/CD300 Operating Instructions Manual

6 Press MENU.
The menu appears.
7 Select
b
OK] with 4/b, then
press .
To unmark selected print
ttlNkS
Select the image to be unmarked in
step 5 with A/I/4/l,, then press 0.
To unmark all the print
marks
Select [ALL] with 41, in step 4, then
press 0. Select [OFF] with 4//,, then
press 0.
The &' marks on all images are
unmarked.
To cancel marking the print
mark
Select [CANCEL] with q/, in step 4,
then press
0, or select [EXIT] with d/
b in step 7, then press 0.
l
You cannot mark moving images, Clip
Motion images or images recorded in
TEXT mode.
l
If you mark an image recorded in TIFF
mode with a mint mark. onlv the
uncompressed image is printed, and the
JPEG image recorded at the same time is
not printed.
l
If you mark an image with a print mark,
the disc space will decrease. Also, if you
unmark tire print mark, the disc space will
decrease.
l
If the disc space is not sufficient, you may
not be able to mark an image with a print
mark.
Formatting a CD=RW
When deleting all the images in the
CD-RW or using the CD-RW
formatted with other equipment than
this camera, format the
CD-RW. When
you format a CD-RW, all data stored
on the disc will be deleted. Check the
contents of the disc before formatting.
The initialization is also executed after
the format.
1
2
3-5
Insert only the CD-RW you
want to format.
Set the mode dial to SET UP.
The setup screen appears.
Select [ @] (DISC TOOL) with
A/V, [FORMAT] with b/A/V,
then press b.
Select
b
OK] with A/V, then
press .
"FORMAT PLACE ON LEVEL
SURFACE" appears on the LCD
screen.
Select
b
OK] with A/Y, then
press .
To cancel formatting
Select [CANCEL] with A/I in step 3,
then press 0.
82