In Single-Image Mode; In Index (Nine-Image) Mode - Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual

• If you mark an image shot in TIFF mode with a
print mark, only the uncompressed image is
printed, and the JPEG image recorded at the
same time is not printed.
• If you mark an image with a print mark, the
disc remaining space will decrease. If you
unmark the print mark, the disc remaining
space will also decrease.
• If the disc remaining space is not sufficient, you
may not be able to mark an image with a print
mark.
• Make sure to finalize the disc before having
images printed at a shop (page 44).
92

In single-image mode

a Set the mode dial to
b Display the image you want to
print with b/B.
c Press MENU.
The menu appears.
d Select [PRINT] with b/B, then
press z.
The (print) mark is marked on the
displayed image.
60min
640
5/5
DELETE PROTECT PRINT SLIDE
OK
To unmark the print mark
Press z again in step 4. The
mark disappears.

In index (nine-image) mode

a Set the mode dial to
.
press the zoom W button once
to display the index (nine-
image) screen.
b Press MENU.
The menu appears.
c Select [PRINT] with b/B, then
press z.
d Select [SELECT] with b/B,
then press z.
• When marking print marks, you cannot
select [ALL].
e Select the image you want to
print with v/V/b/B, then press
z.
The
(print)
selected image.
•
SET
f Repeat step 5 to print other
images.
, then
(print) mark appears on the
MENU TO NEXT