Formatting A Cd-Rw; Changing The Setup Settings (Set Up) - Sony MVC-CD200 Service Manual

6
Press MENU.
The menu appears.
7
Select [OK] with b / B , then
z
press .
To unmark selected print
marks
Select the image to be unmarked in
v V b B z
step 5 with / / / , then press .
To unmark all the print
marks
b B
Select [ALL] with / in step 4, then
z b B
press . Select [OFF] with / , then
z
press .
The marks on all images are
unmarked.
To cancel marking the print
mark
b B in step 4,
Select [CANCEL] with /
z b
then press , or select [EXIT] with /
B in step 7, then press z
.
Notes
• You cannot mark moving images, Clip
Motion images or images recorded in
TEXT mode.
• If you mark an image recorded in TIFF
mode with a print mark, only the
uncompressed image is printed, and the
JPEG image recorded at the same time is
not printed.
• If you mark an image with a print mark,
the disc space will decrease. Also, if you
unmark the print mark, the disc space will
decrease.
• If the disc space is not sufficient, you may
not be able to mark an image with a print
mark.
82

Changing the setup settings (SET UP)

Set the mode dial to SET UP. The setup screen appears. You can set up the following
items with the control button.
DISC TOOL
Item Setting
FINALIZE OK Finalizes a disc (page 32).
CANCEL Cancels the finalization.
FORMAT OK Formats a CD-RW (page 82).
CANCEL Cancels formatting of the CD-RW.
INITIALIZE OK Initializes a disc (page 18).
CANCEL Cancels the initialization.
UNFINALIZE OK Unfinalizes a CD-RW (page 34).
CANCEL Cancels the unfinalization.
CAMERA
Item Setting
x
SCENE TWILIGHT Selects the SCENE SELECTION mode that
SELECTION is assigned to the SCN position (page 58).
LANDSCAPE
PORTRAIT
x
MOVING MPEG MOVIE Records the MPEG movie (page 26).
IMAGE
CLIP MOTION Records the Clip Motion.
DATE/TIME DAY & TIME Sets whether to insert the date and time into
DATE the still image (page 70).
x
OFF
x
DIGITAL ZOOM ON Uses digital zoom (page 23).
OFF Does not use digital zoom.
BRACKET STEP ±1.0EV Sets the exposure plus minus value when
(MVC-CD300 x recording three images with each exposure
±0.7EV
only) value shifted (page 63).
±0.3EV
RED EYE ON Reduces the red-eye phenomenon (page 24).
REDUCTION
x
OFF
x
AF ON Uses when it is hard to focus on the subject
ILLUMINATOR under dark situations (page 25).
OFF
84

Formatting a CD-RW

When deleting all the images in the
CD-RW or using the CD-RW
formatted with other equipment than
this camera, format the CD-RW. When
you format a CD-RW, all data stored
on the disc will be deleted. Check the
contents of the disc before formatting.
The initialization is also executed after
the format.
2
1
3 – 5
1
Insert only the CD-RW you
want to format.
2
Set the mode dial to SET UP.
The setup screen appears.
3
Select [ ] (DISC TOOL) with
v V B v V
/ , [FORMAT] with / / ,
then press B .
4 Select [OK] with v / V , then
press z .
"FORMAT PLACE ON LEVEL
SURFACE" appears on the LCD
screen.
v V
5 Select [OK] with / , then
z
press .
To cancel formatting
v V
Select [CANCEL] with / in step 3,
z
then press .
Description
Description
1-20
Notes
• When you format, be sure to use a fully
charged battery pack or the AC power
adaptor as the power source.
• CD-Rs cannot be formatted.
• The disc which is formatted using other
equipment than this camera cannot be used
with this camera. Format the disc again
with this camera.
• It takes about seven minutes to execute the
format.
• About 300 times formatting can be
available on a CD-RW.
• Once you format the CD-RW, protected
images are also deleted.
SETUP 1
Item Setting
FILE NUMBER SERIES Assigns numbers to files in sequence even if
the disc is changed.
x
RESET Resets the file number that starts from 0001
each time the disc is changed.
CONVERSION ON Set to [ON] when using the VCL-MHG07
LENS (MVC- conversion lens (not supplied). At this time,
CD300 only) the zoom function does not work. Also, note
that the VAD-S70 adaptor ring needed to
mount the conversion lens to your camera is
not sold in some countries and regions.
x
OFF
x
/ ENGLISH Displays the menu items in English.
LANGUAGE
/JPN Displays the menu items in Japanese.
CLOCK SET OK Sets the date and time (page 14).
CANCEL
When [CONVERSION LENS] is set to [ON]:
• The SCENE SELECTION and zoom functions are not activated.
• When the mode dial is set to S or M, the iris value can be selected only from F4 or more.
• The focus preset is not activated.
• The macro recording is not activated.
SETUP 2
Item Setting
LCD BRIGHT Selects the LCD brightness (page 22).
BRIGHTNESS x
NORMAL
DARK
LCD BRIGHT Selects the brightness of the LCD backlight.
BACKLIGHT x
NORMAL
BEEP SHUTTER Turns on the shutter sound only. (The shutter
sound is heard when you press the shutter
button.)
x
ON Turns on the beep/shutter sound (when you
press the control button/shutter button).
OFF Turns off the beep/shutter sound.
VIDEO OUT NTSC Sets the video output signal to NTSC mode
(e.g., Japan, the USA).
PAL Sets the video output signal to PAL mode
(e.g., Europe).
83
Description
Description
85