Shooting close-ups (Macro)
The macro recording mode is used when
zooming up a small subject, such as flowers
or insects. You can shoot close-ups of
subjects up to the distances specified below.
When the zoom is set all the way to
the W side:
Approx. 4 cm (1 5/8 inches) from the lens
surface (MVC-CD400)
Approx. 3 cm (1 3/16 inches) from the lens
surface (MVC-CD250)
When the zoom is set all the way to
the T side:
Approx. 20 cm (7 7/8 inches) from the lens
surface (MVC-CD400)
Approx. 80 cm (31 1/2 inches) from the lens
surface (MVC-CD250)
28
60min
1
, Set the mode dial to
press B (
) on the control
button.
The
(macro) indicator appears on the
LCD screen.
• If the menu is currently displayed, press MENU
first so that the menu disappears.
• You can also carry out this operation when the
mode dial is set to S*, A*, M*, SCN (other than
landscape mode) (page 33), or
* MVC-CD400 only
640
4
2
, Center the subject in the frame,
, and
and shoot the image.
To return to normal recording mode
Press B (
The
indicator disappears.
.
60min
640
) on the control button again.
Need help?
Do you have a question about the MVC-CD250 Operating Instructions (primary manual) and is the answer not in the manual?
Questions and answers