Self-Diagnostics Display - Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual

Self-diagnostics
display
– If a code starting with an alphabet
letter appears
Your camera has a self-diagnosis display.
This function displays the camera condition
on the LCD screen with a combination of a
letter and four numerical digits. If this
occurs, check the following code chart and
attempt the corresponding corrective
actions. The last two digits (indicated by
ss) will differ depending on the state of
the camera.

Self-diagnostics display

108
Code
C:32: ss
C:13: ss
E:61: ss
E:91: ss
If you are unable to solve the problem even
after trying the corrective actions a few
times, contact your Sony dealer or local
authorized Sony service facility and inform
them of the 5-digit code.
Example: E:61:10
C:32:ss
Cause
There is trouble with your
camera's hardware or zoom
function.
The camera cannot read or write
data on the disc.
The inserted disc cannot be used
with your camera, or the data is
damaged.
A camera malfunction that you
cannot reverse has occurred.
Corrective action
• Turn the power off and on again
(page 17).
• Clean the disc.
• Insert a new disc (page 20).
• Press the RESET button (page 98) located
on the bottom of the camera, then turn on
the power again.