Sony MVC-CD250 Operating Instructions (primary manual) Operating Instructions Manual page 78

Before operation
Set [MOVING IMAGE] to [CLIP
MOTION] in the SET UP settings (pages 62
and 116).
Shutter
Mode dial
MENU
a Set the mode dial to
b Press MENU.
The menu appears.
c Select
(IMAGE SIZE) with b/
B, then select the desired
mode with v/V.
d Shoot the image for the first
frame.
60min
160 160 160
1/10
MAKING "CLIP MOTION"
78
e Shoot the image for the next
Control button
f Press z.
• Before carrying out step 6, the images are
saved temporarily in the camera memory. These
images are not recorded on the disc yet.
• The date and time are not superimposed onto
Clip Motion images.
• When viewing an image recorded in Clip
Motion on the index screen, the image may
.
appear different from the actual image.
• GIF files not created on this camera may not be
displayed correctly.
frame.
Press the shutter button once to shoot
the next frame, then repeat this
operation until you have shot the
desired number of frames.
All the frame images are recorded on
the disc.
To delete some or all of the
frame images while making a
Clip Motion recording
1 Press b (7) in step 4 or 5.
The shot frame images are played back
in turn and stop at the last image.
2 Press MENU, and select [DELETE
LAST], or [DELETE ALL] with b/B,
then press z.
3 Select [OK] with v/V, then press z.
When [DELETE LAST] is selected in
step 2, each time you repeat steps 1
through 3, the last frame you shot is
deleted.