Product Compliance - Honeywell Touchpoint Plus Wireless User Manual

Issue 1 04/19
3020M5044_1

2.4 Product Compliance

This product complies with the following standards and directives.
Other safety directives may apply to the complete system installation if an OEM's product is integrated into
other equipment or machinery.
Title
Ingression protection
Hazardous Locations
(Non-Incendive)
Electrical Safety
EMC/RFI
Battery Pack
Low Voltage Directive
Wireless
Performance
Note: The Equipment referred to in this manual contains components and assemblies that are each certified
for use in a variety of differing environments, and it is the site owner's responsibility to confirm the suitability of
the equipment prior to its installation and use.
Check the product rating plate and look for the following marks to ensure that the supplied equipment
is suitable for its intended location and purpose:
Products bearing the CE mark conform to all applicable European Directives as stated on the Honeywell
product specific EC Declaration of Conformity.
Products bearing the UL mark conform to the requirements for Ordinary Locations. The letters C and US
mean that the product is certified for use in Canada and the United States of America.
Safety Hazards, Warnings And Cautions
Standards
IP65
Class 1, Division 2, Group A, B, C, D, Temp.
Code T4
UL 121201, CAN/CSA C22.2 No. 213-17
UL/IEC/EN 61010-1
CSA C22.2 No.61010-1-12/No.142, and UL
508
EMC Directive (EN 50270:2015)
UN 38.3 (IEC 62133), UL 2054, UL 60950-1
and CSA C22.2 No.60950-1-07
IEC/EN 61010-1 (3rd Edition)
FCC 15C, IC RSS-247
CSA 22.2 No. 152-M1984
Read and understand the instruction manual before operating or servicing the equipment.
IMPORTANT
11
Touchpoint Plus Wireless
Certificates
UL File E480011
UL File E466771, E470577 and
E480011
UL File MH60522
UL File E480011
User Guide