Issue 1 04/19
3020M5044_1
4.9 Responding to Alarms
4.9.1 View Active Alarms
Active alarms can be viewed:
1) From the Input screen, select the red filter icon.
The screen will display a list of the input channels with active Alarms, starting with the most recent event.
Unacknowledged alarms will flash, acknowledged ones will be stay on. Touch the Accept button to
acknowledge the alarms.
Note: the display will show the channel ID, location tag. If more than one alarm level has been triggered on
the same channel, a high priority alarm levels will be shown.
4.9.2 Accept or Acknowledge an Active Alarm
Always check that emergency evacuation and roll-call is completed before silencing the alarms.
To acknowledge an alarm, log in and press the
silence the alarm
stop the channels, LEDs and icons flashing
acknowledge all active events except Faults
Note: Check for new alarms if the sounder restarts after you have acknowledged it.
Note: If a Relay Output channel has the Alarm Update function enabled, the alarm will be ignored for the
Cause and Effect matrix once it is acknowledged.
User Guide
button for >1 second, which will:
30
Touchpoint Plus Wireless
User Guide