Switching On And Off - Honeywell Touchpoint Plus Wireless User Manual

Issue 1 04/19
3020M5044_1

4.4 Switching On and Off

Before switching power on, ensure that a qualified person has checked that the wiring is safe and conforms to
local regulations, and that all electrical connections are in accordance with Ch.5 Electrical Power Connection
and Interfacing. Also check that the battery switches are 'On'. (If a backup battery is fitted)
Switch on the battery switch (if fitted) and apply power. You can use a multi-meter to check that the DC supply
to the DC Connector block is between 18 and 32 VDC. (≥24 VDC when a battery is installed.)
The system start up sequence may last for up to 5 minutes depending on the number of channels in use.
When start up is completed, Touchpoint Plus Wireless will display the Input screen, indicating the current
status of the system. The Channel tile view is shown below:
Key to Icons:
Toggle to select screen layout
External main power is provided.
Touch for status
External power is not connected.
Touch for status
Event History (Inhibit shown)
Login Status (Viewer)
Toggle auto-scroll on and off
Online monitoring
User Guide
Login Status(Admin)
Login Status(Service)
Login Status(Operator)
SD card is detected
Menu
Filter Display (Inhibits shown)
Wind direction
21
Touchpoint Plus Wireless
User Guide