Location And Description Of Warning Labels; Safety Warning Labels - Honeywell Touchpoint Plus Wireless User Manual

Issue 1 04/19
3020M5044_1

2.2 Location and Description of Warning Labels

2.2.1 Safety Warning Labels

In accordance with the requirements of the European Standard EN 60825–1, appropriate warning labels are
mounted in specified locations on the equipment. This is to indicate conditions under which the user could be
subjected to electrical hazards.
Figure 1. Quickstart Guide Label
Figure 3. Protective Earth (Ground) Point
This Protective Earth (Ground) location point label is
used inside the system and is not normally visible to
the operator.
Safety Hazards, Warnings And Cautions
(Not to Scale)
Figure 5. Internal Label Positions
Figure 2. SMPS Voltage Warning Label
(Removed During Installation)
Figure 4. Equipment Earth (Ground) Point
This Equipment Earth (Ground) location point label is
used inside the system and is not normally visible to
the operator.
8
Touchpoint Plus Wireless
User Guide