Zte ZXHN H168N Maintenance Management Manual page 34

ZXHN H168N Maintenance Management Manual
Parameter
IP Version
IP Type
IP Address
Subnet Mask
Gateway
DNS1–DNS3
IPv6
GUA
GateWay From
DNSv6 From
Prefix Delegation From
GUA
NAT
VLAN
5. Click Apply.
Configure the
6. Click DSL Modulation Parameters to go to the page of DSL Modulation Parameters,
as shown in
SJ-20140220172310-002|2014-03-03 (R1.0)
Info Get Mode
From
From Prefix
Switch
Switch
DSL Modulation Parameters
Figure 5-12.
Description
The IP version includes:
l
IPv4
l
IPv6
l
IPv4/v6
Select the IP type when Link Type is IP.
The IPv4_Static IP Address.
Subnet mask of the device.
It is usually the IP address of the ZXHN H168N device
by default.
IP address of the DNS server for static connections. You
can set up to three IP addresses for the server. These IP
addresses are provided by the ISP.
The options are:
l Manual Mode
l Auto Mode
Mode of obtaining global address, including SLAAC,
Static and DHCPv6.
Mode for obtaining gateway.
The options are: SLAAC and Static.
Mode for obtaining DNS.
The options are:
l
SLAAC
l
Static
l DHCPv6
The mode of prefix delegation.
The prefix of obtaining global address.
Enable the NAT switch function.
When multiple computers in a
to visit the Internet, NAT
network address to the public network address of the
WAN port.
Enable the VLAN switch function.
5-10
ZTE Proprietary and Confidential
LAN share one IP address
is used to transfer the private