Related Manuals for RADWAG THB.Y
Summary of Contents for RADWAG THB.Y
-
Page 1: User Manual
Ambient Conditions Module THB.Y THB.X THB.PC THB.R USER MANUAL IMMU-49-01-10-17-EN www.radwag.com... - Page 2 OCTOBER 2017...
-
Page 3: Table Of Contents
Contents GENERAL INFORMATION THB MODULE DESIGN UNPACKING 3.1. Unpacking START-UP 4.1. THB.Y and THB.X Modules 4.2. THB.PC Modules 4.3. ECR Recorder and THB.R Set MAINTENANCE, SERVICE, RECYCLING 5.1. Maintenance 5.2. Service 5.3. Recycling... -
Page 4: General Information
2 – sensors shield, 3 – connector for an additional temperature sensor (TH-W2), 4 – cable terminated with a respective connector (connector type conditioned by THB module model): DSUB15 – for THB.Y; DB9 – for THB.X and THB.PC; PS2 – for THB.R. -
Page 5: Unpacking
ECR recorder: 1 – housing, 2 – power supply, Connectors arrangement: a – power supply socket, b – RS232 connector, recorder-computer connection via PT0228 cable, b – USB B connector, recorder-computer connection via standard USB cable, d – PS2 connector, for connection of liquid aspirator (weighing table for pipettes calibration), e –... -
Page 6: Start-Up
THB.Y THB.Y has been designed to enable measurement of ambient conditions. It cooperates with laboratory balances of 3Y and 4Y series. It is connected directly to COM 2 port of the balance. - Page 7 THB.X THB.X has been designed to enable measurement of ambient conditions. It cooperates with laboratory balances of X2 series. It is connected directly to either COM 1 or COM 2 port of the balance. THB.X allows to measure: air temperature, atmospheric pressure, air humidity. Set components: - THB.X module, and - TH-W2 water temperature sensor, on purchase order.
-
Page 8: Thb.pc Modules
4.2. THB.PC Modules In order to run the module, connect it to the computer. On your computer install the THB-R-Single software enabling readout of measured quantities values, next set communication parameters. In order to do it correctly, follow instructions provided in user manual of the balance. THB.PC THB.PC has been designed to enable measurement of ambient conditions. -
Page 9: Ecr Recorder And Thb.r Set
4.3. ECR Recorder and THB.R Set In order to run the ECR recorder, connect it to the computer, next connect the THB.R module to the recorder. On your computer install the THB-R-Multi software enabling readout of measured quantities values, next set communication parameters. In order to do it correctly, follow instructions provided in user manual of the balance. -
Page 10: Maintenance, Service, Recycling
Power supply housing and sensors shield can be cleaned using cloth soaked with alcohol-based substance. 5.2. Service Only authorized RADWAG service points are allowed to disassembly, repair and modify the module. 5.3. Recycling The device and the packaging must be recycled in accordance with valid state regulations.