BMW Z4 Roadster Owner's Handbook Manual page 89

The following actions can be performed on the
welcome screen:
▷ Select a driver profile.
▷ Call up the settings menu for driver profiles.
▷ Start the setup assistant.
This option is offered for a limited time in new
vehicles.
As soon as the engine is started or any button is
pressed, the welcome screen disappears.
Setup assistant
The setup assistant is offered on the welcome
screen in new vehicles for a limited time in order
to define the key features of a new driver profile.
The driver is guided through the following func‐
tions step by step:
▷ Set the system language.
▷ Register mobile devices with the vehicle.
▷ Non-ConnectedDrive countries: Assign pro‐
file names.
▷ ConnectedDrive countries:
Enable continuous synchronisation between
the ConnectedDrive account and the driver
profile.
Settings saved in the ConnectedDrive ac‐
count are transferred to the vehicle. If the
driver has not yet created a ConnectedDrive
account, one must be created in the Connec‐
tedDrive portal.
▷ Confirm the declaration regarding the transfer
of vehicle data.
▷ Define the voice command used to start the
voice control.
Guest profile
The guest profile can be activated by any driver.
Vehicle settings that are made when the guest
profile is active are saved in the guest profile.
The guest profile is automatically active in the
following cases:
▷ No driver profiles have been created yet.
Opening and closing
Online Edition for Part no. xxx - X/18
▷ No driver profile is assigned to the remote
control used to unlock the vehicle.
▷ No driver profile is assigned to the digital key
used to unlock the vehicle.
▷ It is not possible to clearly identify which
driver profile should be activated.
The following restrictions apply:
▷ The guest profile cannot be renamed.
▷ Recognition cannot be assigned to the guest
profile.
▷ PIN protection is not possible.
▷ ConnectedDrive countries: Synchronisation
with a ConnectedDrive account is not possi‐
ble.
The guest profile is selected on the welcome
screen or via iDrive:
1. "CAR"
2. "Driver profiles"
3. "Guest"
4. "Sign in"
Creating a driver profile
Driver profiles are created on the welcome
screen or via iDrive:
1. "CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
4. "Create driver profile"
ConnectedDrive countries: A ConnectedDrive
account must be assigned to a driver profile. You
can use an existing account or create a new ac‐
count if necessary.
Selecting recognition
The recognition setting is made on the welcome
screen or via iDrive:
1. "CAR"
2. "Driver profiles"
3. Tilt the Controller to the right.
CONTROLS
89