BMW Z4 Roadster Owner's Handbook Manual page 88

CONTROLS
Opening and closing
Opening from outside
▷ Without Comfort Access: unlock the vehicle,
then press the button on the outside of the
boot lid.
With Comfort Access: unlock the vehicle or
have the remote control about your person,
then press the button on the outside of the
boot lid.
▷ Press and hold the button on the re‐
mote control for approximately
1 second.
If applicable, the doors are also unlocked.
Opening with remote control, see page 78.
Opening from inside
Press the button in the driver's door stor‐
age compartment.
Closing
Pull the boot lid down using the handle recess.
88
Opening and closing
Driver profiles
Principle
Driver profiles can be created in order to store
personalised vehicle settings. If multiple drivers
use a vehicle, each driver can create a personal‐
ised driver profile. If a driver profile is selected,
the vehicle automatically adopts the settings
stored in the driver profile.
General
You can create three personal driver profiles.
Each driver profile can be protected via a PIN so
that other drivers cannot see or change the
saved settings.
There is also a guest profile available which can
be selected by any driver. The guest profile is ac‐
tive if no personal driver profile has been selec‐
ted.
Changes to the vehicle settings are saved auto‐
matically in the active driver profile or in the guest
profile.
Recognition via a remote control and a digital
key, see page 84, can be assigned to a driver
profile so that the vehicle settings are adjusted to
the relevant driver as soon as the vehicle is un‐
locked. As soon as the remote control or the dig‐
ital key is detected by the vehicle, the relevant
driver profile is activated.
ConnectedDrive countries: The settings saved in
the driver profile can be synchronised with the
personal BMW ConnectedDrive account. This
makes it possible to use these settings in other
BMW vehicles as well.
Operating requirements
If the driver profile is changed, the vehicle cannot
move at any more than walking speed.
Welcome screen
The welcome screen is shown once the Control
Display is switched on.
Online Edition for Part no. xxx - X/18