BMW Z4 Roadster Owner's Handbook Manual page 153

The data can be displayed and reset according
to different intervals, for example after refuelling.
Display on the Control Display
Overview
The following information is displayed:
▷ Set interval for resetting the journey data.
▷ Average consumption.
▷ Total time engine is switched off by Auto
Start Stop function.
▷ The route covered in the coasting drive state.
▷ Consumption history as a diagram.
Displays
Via iDrive:
1. "CAR"
2. "Driving information"
3. "Journey data"
Consumption history
The consumption history shows the average
consumption in a diagram as a function of the
route covered and the driving mode.
The average consumption is indicated as a line
running through the diagram.
Display in the instrument cluster
Information about the stretch of road can be dis‐
played as a widget in the revolution counter. Se‐
lecting and setting widgets in the instrument
cluster, see page 141.
The following information is displayed:
▷ Total distance driven
▷ Set interval for resetting the journey data.
▷ Route covered, depending on the set interval.
▷ Average speed.
Online Edition for Part no. xxx - X/18
Displays
Resetting journey data
The intervals at which the values are reset can
be adjusted.
Via iDrive:
1. "CAR"
2. "Driving information"
3. "Journey data"
4. "Values since"
5. Select the desired setting:
▷ "Start of journey ( )": the values are reset
automatically if the vehicle is at a standstill
for approximately four hours.
▷ "Refuel ( )": the values are reset automati‐
cally after refuelling with a significant
amount of fuel.
▷ "Ex works ( )": the values since leaving the
factory are displayed.
▷ "Individual ( )": the values since the last
manual reset are displayed. The values
can be reset at any time.
Resetting average values
manually
The following interval can be reset manually at
any time: "Individual ( )".
Via the button on the turn indicator lever:
1. Press the button on the turn indicator lever
repeatedly until the widget for the journey
data is selected.
2. Press and hold the button on the turn indica‐
tor lever.
CONTROLS
153