BMW Z4 Roadster Owner's Handbook Manual page 234

CONTROLS
The system is switched on around 10 minutes
before the set departure time and remains on for
up to 5 minutes after the set departure time.
For safety reasons, the system can only be
switched on twice in succession. The system will
be available again once the drive-ready state has
been activated and deactivated again.
Observe the information regarding intended use
of the vehicle, see page 10.
Setting the departure time
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate comfort"
4. "Aux. climate control/ventilation"
5. Select the required departure time.
6. Setting the departure time.
7. Select the day of the week if necessary.
Activating the departure time
Operating requirements
If a desired departure time is to control when the
system is switched on, the relevant departure
time must be activated first.
Via iDrive
1. "CAR"
2. "Settings"
3. "Climate comfort"
4. "Aux. climate control/ventilation"
5. Activate the required departure time.
, Symbol on the automatic air condition‐
ing system signals when a departure time is ac‐
tive
234
Climate
Operating air conditioning
functions using spoken
commands
General
▷
▷
▷
Saying voice commands
Most air conditioning functions can be operated
using spoken commands from the vehicle inte‐
rior, for example:
▷
▷
▷
Online Edition for Part no. xxx - X/18
Instructions for the voice control system, see
page 56.
When using spoken commands for operation,
it is possible to switch between voice control,
iDrive and buttons.
To have possible voice commands read
aloud: ›Voice commands‹ or ›Help‹.
Activating the air conditioning sys‐
tem: ›Activate climate control‹.
Deactivating the automatic recirculated-air
function: ›Deactivate ... air recirculation‹.
Specifying a particular tempera‐
ture: ›Temperature [...] at ...‹.