BMW Z4 Roadster Owner's Handbook Manual page 119

Information about which child restraint systems
can be used on the seats in question in accord‐
ance with the ECE-R 16 and ECE-R 129 stand‐
ard.
Seat position number.
Seat position suitable for universal fastening with a
belt.
i-Size seat position.
Seat position suitable for side fastening: – L1/L2.
Largest rear-facing fastening: – R1/R2X/R2/R3.
Largest front-facing fastening: – F1/F2X/F2/F3.
Largest suitable booster mount: – B2/B3.
a) Adapt the front/back position of the front passenger seat and, if necessary, move it to the highest
position to achieve the best possible routing of the belt.
b) When using child seats with a support stand on the front passenger seat, remove the foot mat.
Not compatible with i-Size seat position with a support stand: cannot be used.
Seat position with lower ISOFIX anchors, but without Top Tether: cannot be used.
Seat belt locks for adults are located on the side between the two lower ISOFIX anchors: cannot be
used.
Seat number Position in the vehicle
1 Front left
2 Front centre
3 Front right
4 2nd seat row left
5 2nd seat row centre
6 2nd seat row right
7 3rd seat row left
Carrying children safely
Online Edition for Part no. xxx - X/18
Left-hand drive vehicles: Which
child restraint systems can be used
on the vehicle seats
If the vehicle is equipped with i-Size, the value af‐
ter the / applies to the vehicle.
Seat position
1
No
No
No
No
No
No
Seat number Position in the vehicle
8 3rd seat row centre
9 3rd seat row right
Right-hand drive vehicles: which
child restraint systems can be used
on the vehicle seats
If the vehicle is equipped with i-Size, the value af‐
ter the / applies to the vehicle.
CONTROLS
3 – a)
yes/yes
no/yes – b)
no/no
R1/R2
F3/F3
B3/B3
119