Factory Settings - Yale Real Living YRD240 Installation & Programming Instructions

Resetting Lock to Factory Default
When lock is reset to factory defaults all user codes
(including the Master PIN code*) are deleted and all
programming features are reset to original default settings
(see below).
1. Remove the battery cover and batteries.
2. Remove the interior escutcheon to access the reset
button.
3. The reset button (see image at right) is located above
the PCB cable connector.
4. While pressing the reset button (minimum of 3 seconds)
reinstall batteries. Release reset button.
5. Replace battery cover.
Upon reset, Master PIN Code creation is the only option
available and must be performed prior to any other
programming of the lock.

Factory Settings

Master PIN Code
Automatic Re-lock
Inside Indicator Light
One Touch Locking
Volume Setting
Automatic Re-lock Time
Wrong Code Entry Limit
Shutdown Time
*The Master PIN code must be registered prior to any other
programming of the lock.
Settings
P/N AYRD-240-INST-FUL Rev E
Interior Escutcheon
Factory Setting
Registration required*
Disabled
Disabled (Off)
Enabled
Enabled (Low)
30 Seconds
5 Times
60 Seconds
15