Resetting Lock To Factory Default; Factory Settings - Yale Real Living YRD220 Installation And Programming Instructions

Resetting Lock to Factory Default

When lock is reset to factory defaults all user codes
(including the Master
programming features are reset to original default
settings (see below).
1. Remove the battery cover and batteries.
2. Remove the interior escutcheon to access the
reset button.
3. The reset button (see image at right) is located
above the PCB
4. While pressing the reset button (minimum of 3
seconds) reinstall batteries. Release reset button.
5. Replace battery cover.
Upon reset, Master
option available and must be performed prior to any
other programming of the lock.

Factory Settings

Master
Automatic Re-lock
Inside Indicator Light
One Touch Locking
Volume Setting
Automatic Re-lock Time
Wrong Code Entry Limit
Shutdown Time
*The Master PIN
the lock.
PIN code*) are deleted and all
cable connector.
PIN Code creation is the only
Settings
PIN Code
code must be registered prior to any other programming of
P/N AYRD
Interior Escutcheon
Factory Setting
Registration required*
Disabled
Disabled (Off)
Enabled
Enabled (Low)
30 Seconds
5 Times
60 Seconds
15
-220- INST FUL - Rev F