Page 1
Yale Real Living Key Free Touchscreen Deadbolt ® ® Installation and Programming Instructions Optional Network Module #8-32 x 5/16" Machine screws #7 wood & #8-32 machine x 20mm Combination screws M6x47mm Long through bolt P/N AYRD-240-INST-FUL Rev E...
Page 2
Preparing Door P/N AYRD-240-INST-FUL Rev E...
Page 3
Installing Latch & Strike Plate 2-3/8" position d faut 2-3/4" position optional Pull Press Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. P/N AYRD-240-INST-FUL Rev E...
Page 4
Installing Touchscreen Escutcheon Inside of Door Outside of Door Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. P/N AYRD-240-INST-FUL Rev E...
Installing Cover Tighten screw to replace cover. Congratulations, you've installed the Yale Real Living ® Key Free Touchscreen Deadbolt! Continue with Programming Instructions to customize your product. P/N AYRD-240-INST-FUL Rev E...
Programming Instructions Exterior Escutcheon "P" Key (Return to Previous) Interior Escutcheon Low Battery Indicator Lockout Mode Speaker Privacy Mode Button Failsafe 9 volt Battery Connection (Use Alkaline battery) Lock Activation Master PIN Code must be created before any further programming. Max User Codes = 250 with Network Module.
Page 12
Creating Master PIN Code Creating a Master PIN Code must be performed upon installation or after resetting the lock to factory default. Programming and use of lock is not possible until this step has been successfully completed. "Register Master Code. Press the pound key to continue."...
Page 13
Creating User PIN Codes Master PIN code must be created first. *Max user codes = 250 with Network Module. Max user codes = 25 without. "Menu Mode, enter number, press the pound key to continue." Enter Master PIN code Press Enter User number Press Press...
Unlocking Door with PIN Code Enter PIN Code Press Code Chart Duplicate if necessary PIN Code Management (With Network Module - Up to 250 Users) User Type User Name User # PIN Code Master User ___ User ___ User ___ User ___ User ___ User ___...
Resetting Lock to Factory Default When lock is reset to factory defaults all user codes (including the Master PIN code*) are deleted and all programming features are reset to original default settings (see below). 1. Remove the battery cover and batteries. 2.
Page 16
Definitions All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except Master) PIN code access. When attempting to enter a code while the unit is in Lockout, the RED locked padlock will appear on the screen.
Feature Programming Through Menu Mode Using Master PIN code* 1. Touch screen with back of hand or palm to activate. 2. Enter 4-8 digit master PIN code* followed by key. Lock Response: "Menu mode, enter number, press key to continue." 3.
Programming Troubleshooting Suggested Action Symptom Touchscreen becomes active when pressed w/whole hand. • Use a larger area of the hand or fingers and verify contact Lock does not respond – with at least 3 areas. door is open and • If touchscreen numbers are visible, check to see if they accessible.
NOTE TO INSTALLER AND CONSUMER ® While Yale has included several features to prevent lockout (9-Volt battery jumper, low battery warnings), it is still possible for a lockout situation to occur. Because this product ®...
Page 20
Yale® and Yale Real Living® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. YALE, with its unique global reach and range of products, is the world's favorite lock –...