Placing Out Of Operation - gbo Medizintechnik Duodynator Instructions For Use Manual

Duodynator
Warning!
To avoid the risk of electric shock, the Duodynator and also the
combination of devices Duodynator-Neoserv must only be
connected to the mains with protective earth!
Turn on the Duodynator by the power button on the rear panel. When Neoserv is
connected and should also be used, it must also be turned on using the power switch
on the back.
Data connection
between Duodynator
and Neoserv
AC power connector
with fuse for Neoserv
The Duodynator is equipped with a SD card slot, located
to the right of the display. This port is intended only for
service purposes.

2.4 Placing out of operation

In order to disconnect the device just disconnect it from the mains power supply. No
other measures are to be taken.
 gbo Medizintechnik AG
SD card slot
ON / Off switch for
Duodynator
AC power connector
with fuse
Duodynator
ON / Off switch for
Neoserv
Version 1.2
9
for