Suction Flyout - gbo Medizintechnik Duodynator Instructions For Use Manual

14

3.2 Suction flyout

When using the Duodynator together with the Neoserv the suction operation will be
activated after the Neoserv is switched on. Pressing the suction button, a flyout
folded up in which you can set the parameters for the suction.
The suction, which means the negative pressure in the suction electrodes, can be
adjusted from -40 to -300 mbar.
The suction massage can be adjusted between 0 and 20 pulses / minute.
Note!
!
 If the suction is to be used, the Neoserv must be switched on with its
power switch on the back of the unit before.
 If the Duodynator is switched off using the power switch, the
Neoserv sounds a warning signal which indicates that the Neoserv is
still on and must be switched off.
Note!
!
 If the Neoserv is switched on and connected to the current
stimulation output of Duodynator, suction will automatically
switched on when selecting a current from the Favorite list.
 gbo Medizintechnik AG
Suction
Button
Duodynator
Suction strength
suction massage
Suction on-off
switch
Version 1.2