Knob; Home Screen In The Single-Circuit Operation - gbo Medizintechnik Duodynator Instructions For Use Manual

Duodynator

3.1.2 Knob

The knob is located on the front panel and is used as an intensity knob to adjust the
output voltage as well as a modification controller for changing therapy parameters
such as treatment duration or frequency.
The intensity controller is activated by the selection of the corresponding channel.
After a timeout of 20 seconds, the intensity controller becomes inactive and must be
released for a further intensity change again with the appropriate channel button.
The Knob will be used as a modification knob after pressing a button, such as the
changeable frequency. When the button is pressed, it is provided with a blue border
and may be operated for 3 seconds.

3.1.3 Home screen in the single-circuit operation

After power-up, and ready for operation, the device displays the home screen.
Save the set therapy parameters
as "own therapy"
Channel I selection
and information
button
Direct aid
Button
Detailed Settings
therapy parameters
 gbo Medizintechnik AG
Channel II selection
and information
button
Button
settings
Swelling
with activated swelling
Therapy
duration
Achilondynie
Tennis elbow
Suction Single-circuit
Button selected (green)
parameters
11
Selection
Favourite list
Selection
More
therapies
Selection
Indications
Selection
Single-circuit
interference
is
Version 1.2