Combination Therapy With Ultrasound; General Information - gbo Medizintechnik Duodynator Instructions For Use Manual

Duodynator

4.4 Combination therapy with ultrasound

4.4.1 General information

The Duodynator may only be operated with the Sonostat of gbo Medizintechnik
AG. When operating the Duodynator in combination with other devices gbo
Medizintechnik AG assumes no product liability and warranty.
Note!
!!
If a different ultrasound device is connected, the combination have to be
approved according EN 60601-1 as a system.
The necessary connection between the two devices is the input jack on the back side
of the Sonostat. The device's internal flow path is activated for the selected
ultrasound probe.
Warning!

Observe the operating instructions of the ultrasonic therapy
device (Sonostat)!

The ultrasound therapy must not be operated with the current form
of electroplating due to the acidification of the contact gel.

A current density of 2 mA/cm

Disable the current monitoring (Chapter 3.4 Settings) so that a
smooth course of therapy is possible.
Note!
!!
 Combination therapy should be performed only with biphasic
 We recommend medium frequency currents for the combination
 Use a conductive electrode gel to ensure a flow of current.
 gbo Medizintechnik AG
currents.
therapy.
2
should not be exceeded.
21
Version 1.2