Combination Therapy With Current Stimulation; General Information - gbo Medizintechnik Sonostat User Manual

Sonostat

4.7 Combination therapy with current stimulation

4.7.1 General information

The Sonostat may only be operated with the Duodynator (touch) of gbo
Medizintechnik AG. When operating the Sonostat in combination with other than the
above assumes gbo Medizintechnik AG no product liability and warranty.
Note!
!!
If another stimulation current device is connected, the combination
according to EN 60601-1 has to be approved as a system.
The connection of the devices is performed by the connection of the current
stimulator output to the input jack which is located on the back side of the Sonostat.
The device's internal flow path is activated only for the selected ultrasound head.
Warning!
Observe the operating instructions of the connected electrical
stimulation therapy device (Duodynator)!
The ultrasound therapy must not be operated with galvanic current
due to the acidification of the contact gel.
A current density of 2 mA/cm
Disable the current monitoring of the connected electrical
stimulation therapy device, so that a smooth course of therapy is
possible.
If a multiple socket-outlet is used do not placed it on the floor.
If a multiple socket-outlet is used do not connect any other devices
expect the ones that belong to the system.
If a multiple socket-outlet is used do not connect any other multiple
socket-outlets or extension cords.
gbo Medizintechnik AG
2
should not be exceeded.
19
Version 1.2