H&S 5126 Operator's Manual page 24

CONTROLS & SAFETY EQUIPMENT
Top Shots are provided with several features for operator safety and convenience.
GUARDS & SHIELDS
Whenever possible and without affecting the operation of the Top Shot, guards,
shields and/or hinged shields have been used on this equipment to protect
potentially hazardous areas. In many places, decals are also provided to warn of
potential dangers as well as to display special operation procedures.
AUGER CONTROL
Top Shots have a hydraulically controlled raise/lower main auger to overcome material bridging when
unloading hard-packed waste material. The auger can be hydraulically raised from the tractor seat, as
necessary. An auger height indicator, visible from the tractor seat, allows the operator to monitor the
auger height. When the unit is parked overnight in freezing temperatures, raise the main auger to
prevent the auger from freezing against the bottom of the tank.
DISCHARGE GATE CONTROL
The Top Shot has a hydraulically controlled discharge gate with indicator to regulate the amount of
material being discharged. In freezing temperatures, leave the discharge gate partially opened when
the unit is parked overnight, to prevent the gate from freezing against the bottom of the opening. A
discharge gate height indicator, visible from the tractor seat allows the operator to monitor the gate
opening.
OPERATION
-22-