Next NI2400 User Manual page 9

1
DATALOGGER
NI2400
S1 S2 S3
Example 6 (6 wires and 4 wires mix)
User connects 3 sensors, 1 of them is 6 wires, while the other 2 are 4 wires.
First of all we configure the datalogger to read this sensors, as shown in Figure 14.
Figure 14
According to rules mentioned at the beginning of this chapter, we will start with 6 wires
sensors, followed by 4 wires sensors.
SENSOR1 will be connected to channel 1, A and B terminals, channel 2, A and B terminals,
and channel 3, A and B terminals.
SENSOR2 will be connected to channel 4, A and B terminals, and channel 5, A and B terminals.
SENSOR3 will be connected to channel 6, A and B terminals, and channel 7, A and B terminals.
Wiring schemes are available from web server, or in APPENDIX of this manual.
www.ruggedaq.com
1
Figure 13
Example 7 (6 wires, 4 wires and 2 wires mix)
User connects 5 sensors, 1 of them is 6 wires, other 2 are 4 wires, and the last 2 are 2 wires.
First of all we configure the datalogger to read this sensors, as shown in Figure 16.
Figure 16
According to rules mentioned at the beginning of this chapter, we will start with 6 wires
sensors, followed by 4 wires and 2 wires.
SENSOR1 will be connected to channel 1, A and B terminals, channel 2, A and B terminals,
and channel 3, A and B terminals.
016
DATALOGGER
NI2400
S1 S2 S3 S3
www.ruggedaq.com
Figure 15
017