Next NI2400 User Manual page 44

3
DATALOGGER
NI2400
Figure 82
Click Next to proceed.
Sensor select screen allows channels selection, so you choose which channel(s) you want to
include in the chart. One or more sensors should be selected to go further on.
Axis selection create up to 3 vertical axis related to that channel. If different scales are
presents, this solves readability troubles.
Figure 83
www.ruggedaq.com
3
DATALOGGER
NI2400
Color window let the user select the color of that channels. A full palette is available.
Figure 84
Marker checkbox, will put markes points on the charts as shown here (AN_0001 has Marker
checked, other channels instead do not).
Figure 85
Click Next to go on last configuration screen.
Here it is possible to choose Chart's Title, Subtitle, Description and Name.
086 www.ruggedaq.com
087